Accurate measurements
Roof facets, pitches, ridges, hips and valleys measured from high-resolution aerial imagery before a crew sets foot on your roof.
Roof Inspections
A free, thorough look at your whole roof system
Whether you have a leak, just came through a storm or are buying a home, a roof inspection tells you where the roof really stands. Global inspections are free and carry no obligation.
- Cost
- Free, no obligation
- Scope
- The entire roof system
- Measurement
- EagleView aerial imagery
- Office hours
- Mon to Fri, 8 a.m. to 5 p.m. EST
The short answer
Global Roofing & Contracting provides free, no-obligation roof inspections from its Naples and Pembroke Pines offices. The inspection covers the whole roof system, including the roof covering, flashing, penetrations, valleys and signs of underlayment or deck problems. Global documents the conditions it finds and explains whether the roof needs nothing, a repair or a replacement, with a detailed estimate when work is needed.
When a roof inspection makes sense
Most roof problems start small and stay hidden until water shows up on a ceiling. An inspection catches issues while they are still repairs, and it gives you a clear picture before you make any decision about your roof.
You do not need to suspect damage to ask for one. Many homeowners schedule an inspection simply because the roof is getting older, or because they want to know what to expect over the next few years. Common reasons to call include:
- After a hurricane, tropical storm or severe thunderstorm
- A leak, ceiling stain or musty smell in the attic
- Visible broken tiles, missing shingles or debris on the roof
- Buying or selling a home
- Questions from your insurer about the roof's age or condition
- Planning ahead for a future replacement
What a whole-system inspection covers
A roof is a system, and a useful inspection looks at how the pieces work together rather than just the surface. A few broken tiles matter less than whether water has been reaching the underlayment beneath them.
Global inspects the roof for the conditions that most often lead to leaks and early failure, including:
- The roof covering: cracked, slipped or missing tiles; lifted, creased or worn shingles; loose or damaged metal panels
- Flashing at walls, chimneys, skylights and roof-to-wall transitions
- Penetrations such as plumbing vents, exhaust vents and pipe boots
- Valleys, ridges and hips, where water and wind concentrate
- Signs of underlayment deterioration visible at edges and damaged areas
- Soft spots or other signs of deck damage
- Signs of past repairs and whether they are holding
- Interior evidence such as ceiling stains you point out
Inspections after a storm
Storm damage is often invisible from the ground. Wind can break the seal on shingles without removing them, crack tiles that still sit in place, or loosen flashing just enough to let wind-driven rain in during the next storm.
A post-storm inspection documents what the storm did while the evidence is fresh. If the roof is open to the weather, Global can provide emergency services such as tarping to limit further damage before permanent work is planned.
Just as important, an inspection can confirm when a roof came through a storm in good shape. Not every storm leaves damage that needs attention, and knowing that is worth the visit.
Before you buy or sell a home
In Florida, the roof is one of the first things buyers, lenders and insurers ask about. A roof inspection from a licensed roofing contractor gives you a focused, roof-specific view that complements a general home inspection.
For buyers, it helps you understand whether the roof has years of service left or will need attention soon, which is useful context for your budget and negotiations. For sellers, an inspection before listing lets you address problems on your own schedule instead of discovering them during a buyer's due diligence.
Whether you are a buyer, a seller or an agent, a clear, plain-English explanation of the roof's condition is part of the inspection.
What you receive and how it is documented
After the inspection, Global walks you through what it found and what it recommends. That recommendation may be no work at all, a targeted repair, routine maintenance or a full roof replacement.
Conditions are documented so you can see what the inspector saw. When work is recommended, Global prepares a detailed estimate using EagleView aerial measurement and Xactimate estimating software. EagleView measures roof planes, pitches and edges from high-resolution aerial imagery, which supports an accurate estimate without guesswork.
If storm damage is involved, that documentation also helps when you speak with your insurer, and Global can meet with your insurance adjuster when needed. Coverage decisions belong to your insurer.
How to prepare for your inspection
A little preparation makes the visit more useful. Note where and when you have seen leaks or stains, and whether they appear only during heavy, wind-driven rain. If you know the roof's age or have records of past repairs, have them handy.
Make sure the inspector can reach the sides of the home and any gates. Call 239-653-9703 (Naples office) or 954-889-2201 (Pembroke Pines office) during office hours, Monday to Friday, 8 a.m. to 5 p.m. EST, to schedule.
Storm Damage Check
Think Your Roof Was Damaged?
Tell us what you’re seeing. We’ll show you what it can mean, what to do right now, and what a Global inspection looks at.
Missing Tiles
- What it can mean
- Wind uplift or debris has displaced tile. The underlayment beneath is now exposed to sun and water.
- What to do now
- Stay off the roof. Photograph the area from the ground and note the date of the storm.
- What we inspect
- Tile attachment, adjacent cracked or loose tile, and the condition of the exposed underlayment.
Lifted Shingles
- What it can mean
- Shingle seal strips may have released in high winds. Shingles can look flat again once the wind stops.
- What to do now
- Note any shingles on the ground or creased tabs visible from the yard.
- What we inspect
- Seal strip adhesion, creased or torn tabs, and fastener pull-through along edges and ridges.
Water Intrusion
- What it can mean
- Water is getting past the roof covering, commonly at flashing, penetrations or damaged underlayment.
- What to do now
- Protect belongings, catch active drips and document when water appears.
- What we inspect
- Flashing, roof penetrations, valleys, underlayment and decking around the entry point.
Wind Damage
- What it can mean
- Ridges, hips and edges take the highest wind loads and are usually the first to show damage.
- What to do now
- Walk the perimeter and photograph ridge lines and eaves from the ground.
- What we inspect
- Ridge and hip caps, eave and rake edges, and fastening patterns in high-load zones.
Fallen Debris
- What it can mean
- Impacts from limbs and airborne debris can crack tile or puncture the roof covering.
- What to do now
- Don’t remove heavy debris from the roof yourself. Photograph it where it landed.
- What we inspect
- Impact fractures, punctures, and damage to the underlayment and decking beneath.
Ceiling Stains
- What it can mean
- A stain is often the last sign of a leak. The entry point on the roof may be some distance away.
- What to do now
- Mark the stain’s outline and date so any growth can be tracked.
- What we inspect
- Attic-side evidence, the water path, and the roof above and upslope of the stain.
Not Sure
- What it can mean
- Plenty of storm damage isn’t visible from the ground. A professional inspection is the reliable way to know.
- What to do now
- Note the storm date and anything unusual you’ve seen, inside or out.
- What we inspect
- A complete assessment of the roof system, not just the visible surface.
Request a Roof Inspection
or call 239-653-9703 (Naples) or 954-889-2201 (Pembroke Pines)
Safety first: please don’t climb onto a damaged roof. This tool is general guidance, not a diagnosis.
Technology
Better Information.
Better Decisions.
Global pairs field experience with industry tools (EagleView aerial measurement and Xactimate estimating) so the scope of your roof is measured precisely, priced line by line and documented from start to finish.
- 01Tear-off & disposal
- 02Roof deck review
- 03Underlayment
- 04Roof covering
- 05Flashing & metals
- 06Permits & inspection
Itemized estimating
Industry-standard estimating software builds a detailed, line-by-line estimate that’s easy to review, with nothing lumped together.
Documentation & planning
Photo documentation of roof conditions and progress keeps you informed, supports planning and creates a clear record of the work.
Interfaces shown are stylized illustrations, not live software. EagleView and Xactimate are trademarks of their respective owners.
FAQ
Roof Inspection: Your Questions, Answered.
Can’t find what you’re looking for? Call 239-653-9703 (Naples) or 954-889-2201 (Pembroke Pines), Monday through Friday, 8 a.m. – 5 p.m.
Is the roof inspection really free?
Yes. Global Roofing & Contracting offers free, no-obligation roof inspections. You receive an explanation of the roof's condition and a recommendation, and you are under no obligation to hire Global for any work that follows.
What does a roof inspection include?
It includes a review of the whole roof system: the roof covering, flashing, penetrations, valleys, ridges and hips, visible signs of underlayment or deck problems, and past repairs. Global documents the conditions found and explains what, if anything, needs attention.
Should I get a roof inspection after a hurricane even if I see no damage?
Yes, it is a good idea. Wind can crack tiles, break shingle seals and loosen flashing without obvious signs from the ground. An inspection documents any damage while it is fresh, or confirms the roof came through the storm in good condition.
Is a roof inspection different from a general home inspection?
Yes. A general home inspection covers the entire house and usually gives the roof a brief review. A roof inspection from a licensed roofing contractor focuses only on the roof system and is useful before buying or selling a Florida home.
What is EagleView and why does Global use it?
EagleView is an aerial roof measurement service that uses high-resolution imagery to measure roof planes, pitches and edges. Global uses it alongside Xactimate estimating software to prepare accurate, detailed estimates when work is recommended.
Will an inspection always lead to a replacement recommendation?
No. Many inspections end with a recommendation for a targeted repair, routine maintenance or no work at all. A replacement is recommended only when the condition of the roof system calls for it.
Experience the Global Difference
Your Roof Protects Everything Beneath It.
Whether your roof has been damaged by a storm or has simply reached the end of its lifespan, start with a professional inspection from Global Roofing & Contracting.
239-653-9703Mon – Fri · 8 a.m. – 5 p.m. EST